Forging of castings and forged pieces includes three automatic forging complexes:
- Press 3150 ton-force with forging manipulator, lifting capacity 30 ton-force
- Press 6000 ton-force with forging manipulator, lifting capacity 120 ton-force and forge crane, lifting capacity 300 tons.
- Press 15000 ton-force with forging manipulator, lifting capacity 170 ton-force and forge crane, lifting capacity 500 tons.
Forging complexes allow fabricating forgings with weight up to 250 tons from carbon steel, alloy, corrosion-resistant and heat-resistant steel using ingots with weight from 3 up to 360 tons.
FORGINGS FOR ENERGY ENGINEERING |
Items |
Steel grades |
Dimensions, mm |
BLANK OF ROTORS FOR |
35ХНЗМФА, 26NiCrMoV115, |
DIAMETER OF BARREL |
TURBOGENERATORS |
25Cr2Ni4MoV, 26NiCrMoV145 И ДР. |
UP TO 2000 |
BLANK OF ROTORS OF STEAM |
Р2МА, 30ХНЗМ1ФА, 6ХНЗМ2ФА, |
DIAMETER OF BARREL |
TURBINES |
30Cr2Ni4Mo4 30CrMoNiV511 И ДР. |
UP TO 2000 |
BLANKS OF SHAFTS AND COMPONENTS FOR ENERGY EQUIPMENT |
38ХМ,38ХНЗМФА,34ХН1МА, 34ХНЗМА И ДР.
|
DIAMETER OF SHAFTS |
UP TO 1200 |
BLANKS OF HYDROSHAFTS AND COMPONENTS FOR HYDROPOWER ENGINEERING
|
20ГС, 40, 06Х12НЗД, И ДР.
|
OUTSIDE DIAMETER OF SHAFTS |
FROM 150 UP TO 3000, INSIDE |
DIAMETER — FROM 350 UP TO 1750 |
BLANKS FOR GAS TURBINES |
26ХНЗМ2ФАА, 26NiCrMoV115, 26NiCrMoV145MoD И ДР. |
DIAMETER OF DISKS UP TO 3000 |
BLANKS FOR AES |
22К, 22К - Ш, 22К-ВД, 08-12X18Н10Т И ДР. |
CROSS-SECTION OF BLANKS FROM 400 UP TO 1000 |
FORGINGS FOR METALLURGIC INDUSTRY |
Items |
Steel grades |
Dimensions, mm |
METAL MOLDS FOR CENTRIFUGAL CASTING |
21CrMo10.16CrMoNi, 18CDV4, 21CrMo10MoD
|
INSIDE DIAMETER FROM 300 UP TO 2000. LENGTH UP TO 8900 |
|
BLANKS OF SHAFTS HOT AND COLD ROLLING |
СТ. 50, 60ХН, 75ХМФ, 9Х2МФ, 9X1, 9ХФ, 45ХНМ, 150ХНМ
|
DIAMETER OF BARREL UP TO 1600 |
|
BLANKS OF BANDAGES |
OUTSIDE DIAMETER FROM 500 UP TO 1500. INSIDE DIAMETER FROM 200 UP TO 800, HEIGHT FROM 350 UP TO 650 |
OF ROLLING SHAFTS |
BILLETS |
СТ. 20.09Г2С, 15ГС, 12Х1МФ, 15Х1М1Ф И ДР.
|
DIAMETER FROM 150 UP TO 650 |
|
FORGINGS FOR SHIPBUILDING |
Items |
Steel grades |
Dimensions, mm |
PROPELLER SHAFTS AND RAW MATERIAL FOR SHIPBUILDING |
СПЕЦ. МАРКИ, 38ХНЗМФА, 36Х2Н2МА, СТ. 45, CK50MoD И ДР. |
LENGTH UP TO 19 000 |
BLANKS FOR DIE TOOLING |
Items |
Steel grades |
Dimensions, mm |
DIE BLANKS |
5ХНМ.4Х5МФС, |
THICKNESS FROM 140 UP TO 800, |
56NiCrMoV8 И ДР. |
WIDTH FROM 350 UP TO 3500 |
FORGINGS FOR GENERAL ENGINEERING |
Items |
Steel grades |
Dimensions, mm |
FORGED RODS (SHAFTS) SMOOTH |
СК45, ST- 52.3, 42CrMo4.35NCD16, |
DIAMETER OF SHAFTS UP TO 1000, |
AND STEPPED, PLATES |
18CrNiMo7-6, 100Cr6.90MnCrV, 34CrNiMo6.AISI 4130 И ДР.
|
LENGTH UP TO 12000 |
THICKNESS OF PLATES UP TO 800 |
SHELL RINGS |
15Х2НМФА, SA336F22, 40CrMnMoV, SA336F11 И ДР.
|
DIAMETER UP TO 5500, |
HEIGHT UP TO 3900 |
FORGINGS IN THE ROUGH OF SHAFTS, CYLINDERS, DISKS, PLATES, RINGS, ETC. |
УГЛЕРОДИСТЫЕ, ЛЕГИРОВАННЫЕ. НЕРЖАВЕЮЩИЕ, ЖАРОПРОЧНЫЕ |
SHAFT LENGTH UP TO 23 000 DIAMETER OF CYLINDERS OUTSIDE UP TO 1500, DIAMETER OF DISKS UP TO 4000 |
|
